The RPT 1900 1900MHz, 60 megahertz bandwidth, full PCS Band cell phone signal repeater will work with any type of cell phone signal modulation, CDMA, EDGE, GSM, WCDMA, 3G, 4G and LTE.
Working as part of a Distributed Antenna System (DAS), the RPT 1900 is the best solution to provide full cell phone signal for your in-building needs, office, retail outlet, underground parkade or even a remote resort.
The range, power and performance of the new Telcosat RPT-1900 Band Repeater is unsurpassed when comparing the technical specifications and prices against the competitors products. Telcosat repeaters are quick and easy to install - no complicated computer hook up to set the gain and antenna alignment. Simply align the antenna to the cell tower by using the visual LED signal meter built into the repeater and adjust your repeater to the minimum power level required.
There is no such thing as a perfect cellular network. Everything from weak signals, underground car parks, tunnels, shopping malls, multi-storey buildings, hills and valleys can cause "dead spots" resulting in dropped calls.
Like all Telcosat products, the RPT-1900 is designed, manufactured and supported in Calgary, Alberta, Canada. We do not use offshore manufacturing or offshore customer support.
If you have any questions regarding cellular repeater applications, please contact us today and a member of our technical team would be pleased to assist you.
Frequency Range- 1850 - 1910 MHz (Uplink), 1930 - 1990 MHz (Downlink)
Passband Gain - 90 dB
Pass Band Ripple - Â± 2.5 dB
Channel Ripple - 0.5 dB
Max Absolute Delay - less than 2µs Rx
Noise Figure @ Max Gain- 4 dB Typical
IMD 2 Tone - 43 dBc Typical @ Max Power
Max Power Output - +30 dBm RMS
EVM - less than 3%
Max SWR (In / Out) - 1.5 : 1
Manual Gain Control - 50 dB in 2dB Steps
Spurious Outputs - 55 dBc
Max Power Supply - 28 VDC @ 55 W, 90 - 260 VAC
Operating Temperature - -30ºC to +50ºC
RF Connectors - 50 Ohm N Type, Female
Unit Size - 14.5" x 16.5" x 11.5", 36 x 41 x 29 cm
Weight - 55 lbs, 25 kg Typical
Enclosure Type - Nema 4A, 12
FCC and Industry Canada Certified
Send us a message describing your cell phone signal reception requirement >>>>>>>>>>>>