image of fibre cell phone signal booster

FPT-5000 RF Over Fibre Cell Phone Signal Booster


 Improve Cell Phone Signal Reception In Hard To Reach Locations.


The FPT-5000 is a carrier class cellular fibre optic repeater (booster) for CDMA, GSM, AMPs, WCDMA, 4G LTE. The unit converts RF signals to fibre optic for long distance transport which are then converted back to RF.

Using fibre optic technology allows antennas to be mounted at distances not possible with coax cabling. Antennas can now be mounted kilometers/miles away from the FPT-5000 Cellular Repeater.

The FPT-5000 can be customized per clients requests, and also can be used with other 3rd party RF devices and applications.

Like all Telcosat products, the FPT-5000 is designed and manufactured in Canada.

If you have any questions regarding cellular repeater applications indoors or outdoors, please contact us today and a member of our design team would be pleased to assist you.

Telcosat FPT-5000 Technical Specifications

Unsurpassed Technical Ability

RF Gain at 0 dB Optical Loss: 0.4 dB / km
Gain Accuracy: ± 1 dB
Gain Flatness Across Band: ± 1 dB
Gain Slope: < 0.7 dB / 36 MHz
Gain Adjustment Range: ± 3 dB
Gain Stability Over Temp. Rx / Tx: < ± 3 dB Over Operating Temp. Range
Input TOI @ 1.2 GHz: ± 3 dB
Noise Figure @ 1.2 GHz: < 36 dB, 0dB Optical Loss
Carrier to Noise Ratio @ 1.2 GHz: > 65 dB, 0dB Optical Loss
Input / Output Impedance, VSWR: 50 W, VSWR < 1.5 : 1 (14 dB Minimum)
RF Connectors: N Type, Female
Optical Connectors: Suhner E2000, FC or SC Single Mode Angle Polished
Current Consumption: Rx < 150mA, Tx < 180m
Abs. Maximum RF Input (Tx): > +15 dBm, 5 VDC
Wavelength: 1310 ± 20nm
Power Output: +4 dBm, 3mW Nominal
Operating Temperature: -10ºC - +50ºC
Storage Temperature: -40ºC - +70ºC
Power Supply: 90 - 230 VAC, DC Optional
Unit Size: 14.5 x 16.5 x 11.5", 36 x 41 x 29 cm
Weight: 22 lbs, 10 kg Typical

FCC and Industry Canada Certified